EleksEgg丨Operating Instructions


  • EleksMaker CEO

    Step1: Connect the USB cable and power line, turn on switch.

    0_1497338826430_1.jpg

    Step2: Open the software and connect machine successfully

    0_1497338894980_2.jpg

    Step3: Switch model to EleksEgg

    0_1497338905086_3.jpg

    Step4: Trim servo motor arm and assemble it

    0_1497338916061_4.jpg

    Step5: Set arm angle 20 degree, click [Laser ON]/[Laser Off] to watch the moving range

    0_1497338927995_5-1.jpg
    0_1497338939766_5-2.jpg
    0_1497338943910_5-3.jpg

    Step6: Clip the egg and put down pen holder

    0_1497338969237_6.jpg

    Step7: Click [Laser ON]/[Laser Off] and tune position of pen

    0_1497338988297_7.jpg

    Step8: Move to central point, click [set Home]

    0_1497339008042_8.jpg

    Step9: Double Click picture, change acreage , choose mode, generate

    0_1497339024893_9.jpg

    Step10: Start drawing

    0_1497339039547_10.jpg

    Step11: Finish

    0_1497339051823_11.jpg
    0_1497339056982_12.jpg


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.