sevo (pen lift) not working
I am getting no response from the pen lifting unit. I saw a video where the video had the same problem and mentioned a software fix call A1(?). Any help is appreciated.
@argreen I had a bad servo right out of the box with mine. I installed a high quality Futaba servo and it has worked perfectly ever since. Be careful of the polarity because mine can plug in backwards. Also, try the manual g code command M3S0 to lift, M3S100 to lower.
servo not the problem- second one didn't work also. In the software
What software are you using?
I don't know how you do it with EleksCam but with T2Laser you just select the menu and click EleksDraw and it will set everything correctly including the "laser max" to prevent over driving the servo and stripping gears.