The OutLine mode does’t work. Why ?



  • Good evening everyone,

    I have just purchased an EleksLaser A3 Pro version 2. I started by installing the EleksCAM 3.1 software. And I think that, like everyone else, the software did’t work the first time. When launching an engraving, the laser ignited, but no movement of the motors. So I used the program at the end of the page:

    http://wiki.eleksmaker.com/doku.php?id=elekscam

    It adjusts the time characteristics of the computer clock. The engines will work very well then.
    So I can use the RealPoint, Scan and Point modes. Unfortunately, the OutLine mode does’t work. When I enable this mode, the line of code tells me No Data Generate.
    Can someone give me an explanation on this malfunction? I would need this function to cut couples and airplane rib in the field of model making.

    Thank you


  • Active Member

    you need to right click the icon and select run as administrator.



  • I have the same problem, this does not help. Any other advice?
    Tested on Windows 7, 32 and 64bit systems.


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.