Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.



  • @MuuSer Thanks for prompt reply and sorry late from my side, I am stuck with signature: Problem Event Name: CLR20r3 Locale ID: 1033.
    I tried Windows 10. All other sofware working good with my PC. I thing elekmaker team is giving space to the third party or partners like T2 laser to sale the software's.



  • @pak_slc said in Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.:

    @MuuSer Thanks for prompt reply and sorry late from my side, I am stuck with signature: Problem Event Name: CLR20r3 Locale ID: 1033.
    I tried Windows 10. All other sofware working good with my PC. I thing elekmaker team is giving space to the third party or partners like T2 laser to sale the software's.

    I tried windows 10 32bit , Windows 7 32bit all VCs 2005-2013 nothing works. Eleksdrwa is useless working only diagonally without srevo control with benbox 3.7.99 .eleksmaker should provide us full software support bangood also not answering.



  • Sorry I have no answer to your problem but I can tell you I am running it fine on Windows 7 64bit.



  • @pak_slc said in Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.:

    @pak_slc said in Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.:

    @MuuSer Thanks for prompt reply and sorry late from my side, I am stuck with signature: Problem Event Name: CLR20r3 Locale ID: 1033.
    I tried Windows 10. All other sofware working good with my PC. I thing elekmaker team is giving space to the third party or partners like T2 laser to sale the software's.

    I tried windows 10 32bit , Windows 7 32bit all VCs 2005-2013 nothing works. Eleksdrwa is useless working only diagonally without srevo control with benbox 3.7.99 .eleksmaker should provide us full software support bangood also not answering.

    Now my eleksdrwa start working with Zapmaker Grbl controller visualizer 3.6.1 support of inkscape, elekscam still not working. Waiting for elekscam update.



  • @mrmister
    EleksCam does not work either on my computer, will not start up.
    Can it work with windows 7 ?


  • Active Member

    @diy-laser said in Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.:

    @mrmister
    EleksCam does not work either on my computer, will not start up.
    Can it work with windows 7 ?

    Yes it can work on Windows 7 and Windows 10.

    Did you load the VC install x32?

    Did you change your windows regional settings so that the decimal point is a . instead of a , ?

    Does Elekscam crash at the splash screen?

    Have tried logging into the Administrator account and running the program? EleksCam would not run on one of my computers and so I formatted the disk, reinstalled windows, and now the program runs. I think it had sometjing to do with the user account settings.

    Make a video of starting up the program and post it here.



  • @diy-laser said in Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.:

    @mrmister
    EleksCam does not work either on my computer, will not start up.
    Can it work with windows 7 ?

    Also, have you tried the comparability mode when all else fails? right click, properties compatibility to windows xp or another for the EleksCam - just a thought- It should run no problem on windows 7 with 32 or 64bit. make sure that the drivers are up to date and installed for the system and for the USB.



  • @LASERMAN

    1. FORMAT AND FRESH WINDOWS 7 32 BIT INSTALLED
    2. NET framework 4.5.2 instaled
    3. Vsual C ++ 2005 to 2013 is inalled
    4. REGIONAL SETTING IS OK
    5. Elekscam 3.1 is installed but not running.
      I search Google and tried all available option but not succeeded
      I have no problem with any other software accept elekscam.
      My Windows 7 32bit PC is running all other software smoothly than why elekscam is not working you should tested in worse condition of PC.

    ELEKS LASER A3 IS WORKING FINE WITH OLD BENBOX SOFTWARE UNFORTUNATELY BENBOX IS NOT WORKING WITH ELEKSDRAW, AT LEAST UPDATE BENBOX IF YOU CAN OR REQUEST TO DEVELOPERS OF BENBOX.
    YOU ARE HARDWARE IS OK BUT SOFTWARE SIDE IS VERY WEEK OR YOU ARE GIVING SPACE TO THIRD PARTY, ANY WAY YOU MUST TEST YOUR SOFTWARE IS ABLE TO RUN IN WORST CONDITION BECAUSE YOUR COSTUMERS DOS NOT HAVE TIME TO INSTALL IN REFERENT WAY.
    WHATEVER IS MY PC OR OPERATING SYSTEM YOUR SOFTWARE SHOULD RUN.
    SORRY FOR MY BED ENGLISH BUT I M FED UP WITH YOUR ELEKSCAM SOFTWARE.

    Error and Report.
    Problem signature:
    Problem Event Name: CLR20r3
    Problem Signature 01: bin.exe
    Problem Signature 02: 1.0.0.6
    Problem Signature 03: 583240a4
    Problem Signature 04: SharpGL
    Problem Signature 05: 2.0.0.0
    Problem Signature 06: 4f3c0293
    Problem Signature 07: 18
    Problem Signature 08: 4b
    Problem Signature 09: System.Exception
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789


  • Active Member

    @pak_slc said in Fresh install of Windows 7 - elekscam crashes, it will never open - please fix.:

    CLR20r3

    did you seat the "CLR20r3 error message"

    Yes elekscam needs lots of work. I will not use 3.10.

    If you use elekscam on a laptop, you very likely do not get all features. On many laptops the user does not get all 5 Home coordinate options. These options are important for starting point. The default resolution is 1033x768. On a laptop this default size 3.10 and on older version the size can not be changed

    @ElekMaker-Develop-Department @EleksMaker-CEO @EleksMaker-Z



  • The least function i want is that the program starts. But it don't.
    How did you manage to make the installation so complex?


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.