EleksCAM丨V3.1.0 Release 4.16.2017丨Full AutoMatic Engraving SoftWare


  • Active Member

    This post is deleted!

  • Active Member

    This post is deleted!

  • Active Member

    This post is deleted!

  • EleksMaker CEO

    Sorry, there was an error copying,It has been modified,thanks for reminding



  • @EleksMaker

    1. FORMAT AND FRESH WINDOWS 7 32 BIT INSTALLED
    2. NET framework 4.5.2 instaled
    3. Vsual C ++ 2005 to 2013 is inalled
    4. REGIONAL SETTING IS OK
    5. Elekscam 3.1 is installed but not running.
      I search Google and tried all available option but not succeeded
      I have no problem with any other software accept elekscam.
      My Windows 7 32bit PC is running all other software smoothly than why elekscam is not working you should tested in worse condition of PC.

    ELEKS LASER A3 IS WORKING FINE WITH OLD BENBOX SOFTWARE UNFORTUNATELY BENBOX IS NOT WORKING WITH ELEKSDRAW, AT LEAST UPDATE BENBOX IF YOU CAN OR REQUEST TO DEVELOPERS OF BENBOX.
    YOU ARE HARDWARE IS OK BUT SOFTWARE SIDE IS VERY WEEK OR YOU ARE GIVING SPACE TO THIRD PARTY, ANY WAY YOU MUST TEST YOUR SOFTWARE IS ABLE TO RUN IN WORST CONDITION BECAUSE YOUR COSTUMERS DOS NOT HAVE TIME TO INSTALL IN REFERENT WAY.
    WHATEVER IS MY PC OR OPERATING SYSTEM YOUR SOFTWARE SHOULD RUN.
    SORRY FOR MY BED ENGLISH BUT I M FED UP WITH YOUR ELEKSCAM SOFTWARE.

    Error and Report.
    Problem signature:
    Problem Event Name: CLR20r3
    Problem Signature 01: bin.exe
    Problem Signature 02: 1.0.0.6
    Problem Signature 03: 583240a4
    Problem Signature 04: SharpGL
    Problem Signature 05: 2.0.0.0
    Problem Signature 06: 4f3c0293
    Problem Signature 07: 18
    Problem Signature 08: 4b
    Problem Signature 09: System.Exception
    OS Version: 6.1.7601.2.1.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789



  • @MuuSer
    Hello, thanks for your sharings!
    On my software the outline trace does not work (the software returns: No data generate). Did you try it? Can it be fixed?
    Thank you !


  • Active Member

    @Mirr
    The same happened with my Win10 computer. Two things helped - run EleksCAM with administrator privileges and make sure that your decimal symbol in Windows regional settings is dot, not comma...



  • @MuuSer
    Thank you, trying this now



  • @MuuSer
    OK it works now.
    Thanks a million, I appreciate it very much.
    Mirr



  • On all my PCs (I have tried 5 different machines) I get the following error message as soon as I finish Image editing or Text Editing mode:
    Seems like there is a Problem during GCode Generation:

    1_1501927455438_EleksError2.JPG 0_1501927455438_EleksError1.JPG

    The detailed error message is:
    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.

    ************** Exception Text **************
    System.InvalidOperationException: Object is currently in use elsewhere.
    at System.Drawing.Image.get_Width()
    at System.Drawing.Image.get_Size()
    at DSkin.DirectUI.DuiPictureBox.tMgwUbF4PfECiMUbLD0k(Object )
    at DSkin.DirectUI.DuiPictureBox.OnPrePaint(PaintEventArgs e)
    at DSkin.DirectUI.DuiBaseControl.YuL5MCnokdkF4YtSmQl(Object , Object )
    at DSkin.DirectUI.DuiBaseControl.PaintControl(Graphics g, Rectangle invalidateRect)
    at DSkin.Controls.DSkinBaseControl.tyjW0J5mm4udUHgGq5K(Object , Object , Rectangle invalidateRect)
    at DSkin.Controls.DSkinBaseControl.PaintControl(Graphics g, Rectangle invalidateRect)
    at DSkin.Common.ControlRender.h1eigTP8XCExJyoNXbP(Object , Object , Rectangle invalidateRect)
    at DSkin.Common.ControlRender.JHt5GFIYMw(Object , Rectangle , Object , Rectangle , Rectangle )
    at DSkin.Controls.DSkinPanel.c3NkLHoSgscfdoQmhRJ(Object , Rectangle , Object , Rectangle , Rectangle )
    at DSkin.Controls.DSkinPanel.GPnVhIs7hW(Object , PaintEventArgs )
    at DSkin.DirectUI.DuiBaseControl.OnPaint(PaintEventArgs e)
    at DSkin.DirectUI.DuiBaseControl.XBMFJDfYfKiCCyh6rmb(Object , Object )
    at DSkin.DirectUI.DuiBaseControl.PaintControl(Graphics g, Rectangle invalidateRect)
    at DSkin.Controls.DSkinPanel.svUi5josOGKAqJl7jO5(Object , Object , Rectangle invalidateRect)
    at DSkin.Controls.DSkinPanel.PaintControl(Graphics g, Rectangle invalidateRect)
    at DSkin.Common.ControlRender.h1eigTP8XCExJyoNXbP(Object , Object , Rectangle invalidateRect)
    at DSkin.Common.ControlRender.JHt5GFIYMw(Object , Rectangle , Object , Rectangle , Rectangle )
    at DSkin.Forms.DSkinForm.df7tFPBvL8dm39YcOoI(Object , Rectangle , Object , Rectangle , Rectangle )
    at DSkin.Forms.DSkinForm.jnpOaa92AI(Graphics , Rectangle )
    at DSkin.Forms.DSkinForm.MlsOLSpA45(Object , PaintEventArgs )
    at DSkin.DirectUI.DuiBaseControl.OnPaint(PaintEventArgs e)
    at DSkin.DirectUI.DuiBaseControl.XBMFJDfYfKiCCyh6rmb(Object , Object )
    at DSkin.DirectUI.DuiBaseControl.PaintControl(Graphics g, Rectangle invalidateRect)
    at DSkin.Forms.DSkinForm.S5YhhABEdNNM71pHTPJ(Object , Object , Rectangle invalidateRect)
    at DSkin.Forms.DSkinForm.PrePaint(Graphics g, Rectangle invalidateRect)
    at DSkin.Forms.DSkinForm.Pqqo20BseS2u3isYuAy(Object , Object , Rectangle invalidateRect)
    at DSkin.Forms.DSkinForm.xBLOKAAAQm(Rectangle , Graphics )
    at DSkin.Forms.DSkinForm.<>c__DisplayClass14.<LayeredPaint>b__10(Graphics g)
    at DSkin.Forms.DSkinWindowForm.UpdateLayeredWindow(Double opacity, Action`1 action)
    at DSkin.Forms.DSkinForm.LayeredPaint(Rectangle invalidateRect)
    at DSkin.Forms.DSkinForm.MVKn8s6oJqvvaEPRmCu(Object , Rectangle invalidateRect)
    at DSkin.Forms.DSkinForm.yqjOORmWdT(Object , EventArgs )
    at System.Windows.Forms.Timer.OnTick(EventArgs e)
    at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
    at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

    ************** Loaded Assemblies **************
    mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll

    cncbox
    Assembly Version: 1.1.0.0
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll

    System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll

    System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll

    DSkin
    Assembly Version: 16.4.1.7
    Win32 Version: 16.4.1.7
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/DSkin.DLL

    SharpGL.SceneGraph
    Assembly Version: 1.0.0.0
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    System.Core
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll

    System.Configuration
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll

    System.Xml
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll

    SharpGL.WinForms
    Assembly Version: 2.0.0.0
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    SharpGL
    Assembly Version: 2.0.0.0
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    mscorlib.resources
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/mscorlib.resources/v4.0_4.0.0.0_de_b77a5c561934e089/mscorlib.resources.dll

    System.Data
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Data/v4.0_4.0.0.0__b77a5c561934e089/System.Data.dll

    System.Data.DataSetExtensions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.DataSetExtensions/v4.0_4.0.0.0__b77a5c561934e089/System.Data.DataSetExtensions.dll

    System.Data.SQLite
    Assembly Version: 1.0.88.0
    Win32 Version: 1.0.88.0
    CodeBase: file:///C:/Users/careyer/AppData/Local/Temp/b0494a1f-4bd3-KX9rGV8JlgyIgeoji9hdGA==/System.Data.SQLite.dll

    System.Transactions
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.Transactions/v4.0_4.0.0.0__b77a5c561934e089/System.Transactions.dll

    Svg
    Assembly Version: 1.7.0.31798
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    System.EnterpriseServices
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_32/System.EnterpriseServices/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll

    System.Data.resources
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Data.resources/v4.0_4.0.0.0_de_b77a5c561934e089/System.Data.resources.dll

    System.Numerics
    Assembly Version: 4.0.0.0
    Win32 Version: 4.7.2053.0 built by: NET47REL1
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Numerics/v4.0_4.0.0.0__b77a5c561934e089/System.Numerics.dll

    AForge.Imaging
    Assembly Version: 2.2.5.0
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    CsPotrace
    Assembly Version: 2.0.0.1
    Win32 Version: 1.1.0.0
    CodeBase: file:///C:/Program%20Files%20(x86)/EleksMaker/EleksCAM/bin.exe

    ************** JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.

    For example:

    <configuration>
    <system.windows.forms jitDebugging="true" />
    </configuration>

    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.



  • @careyer
    I have the same problem.
    Somebody help me
    I have A3 2500nW mounted for more than 2 weeks and so far I could not use it
    I already followed the steps of a forum that indicated the installation of the "benbox" and firmware update and did not succeed
    Please help me



  • i have same problèm


  • Developer of T2Laser Software

    I can only suggest you try T2Laser and use my firmware (Grbl 1.1e), it's simple to test your machine is working and you will find much better support.



  • Any News for release of EleksCam new version.



  • Yesterday I assembled my EleksLaser-A3 Pro and installed the EleksCAM software. I got the "Unhandled exception" error mentioned in previous posts but just hit "continue" and all seemed to work correctly after that, at least for LineByLine mode.

    I did note in the LineByLine mode it tries to do the lines in alternating directions and it works fine for the left to right direction. However when it does right to left it does not reverse the order of the segments. So it does the segments left to right while drawing each segment right to left. This causes a lot of back and forth motion and a huge loss in efficiency.



  • Dear EleksMaker support team,

    I have the same problem. im have A3 2500nW Lacer module. so Im using EleksCAM v3.1 software. My lacer module always on it can't be working properly so i update firmware also but it's not working. X,Y,Z moters also got stuck, could you please help me with this matter
    Thanks
    AG


  • Active Member

    @Ashan use a multimeter to check that your power supply is functioning.



  • @nottingham82 Power supply is perfectly working problem is when i power up my lacer module Lacer it's always "ON" i can't do any works. Do u have any solution for this matter ?



  • @Ashan said in EleksCAM丨V3.1.0 Release 4.16.2017丨Full AutoMatic Engraving SoftWare:

    Dear EleksMaker support team,

    I have the same problem. im have A3 2500nW Lacer module. so Im using EleksCAM v3.1 software. My lacer module always on it can't be working properly bolded textso i update firmware also but it's not working. X,Y,Z moters also got stuck, could you please help me with this matter
    Thanks
    AG

    What software did you "upgrade"?

    DO NOT TURN ON POWER TO LASER TO UNLESS LASER SOFTWARE IS RUNNING.


  • Active Member

    @Ashan so your laser has 3 wires. 1 12v power labled + 1 ground labeled - and 1 5v variable input labeled pwm. I have seen on a few that the wires have been wrong. So the 12v output was going to the pwm input and the and the pwm output was going to the 12v input. to check - pull the laser wire off at the laser. turn the machine on. Check the connector that you are getting 12v at the + wire and 0-5v at the pwm wire.


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.