Using a Real Arduino NANO on A3pro with T2
Hello, following several problems with the original boards i went on to use a real Arduino Nano. And well i have a size problem. Can i adjust this somewhere with T2 ?
@znourf Please elaborate, what is the size problem? Grbl 1.1e should fix on any Nano, it doesn't need Optiboot although that's what I typically use.
well when i ask it to burn out on 100 x 100 it simply starts moving out and trys to go boyond bounds. the coords don't seem to match
@znourf What firmware did you load, it sounds like you just need to calibrate the axis.
i missed that one out to calibrate the axes ?
anyway i uploaded the grbl 1.1 from T2 .
Now i managed to burn a bootloader on my nano clone that comes with the eleksmaker.
now i forgot to say this but it seems to come from a geniun 5.5w eleksmaker laser. apparently there is a defect on it and it fried two arduino clones out of 3
@znourf If you loaded my Grbl 1.1e it will set the standard steps that is correct for EleksMaker systems - have you modified your machine? It should be very close, the calibrate would fix it but shouldn't be necessary.
I suggest something else is wrong.