T2L problême téléchargement logiciel



  • Bonjour
    voila ce que j'ai
    0_1533998676681_Capture1.PNG
    le feu est allumer mais ça ne bouge pas.
    j'ai cliquer sur débocage et sur l'enveloppe


  • Developer of T2Laser Software

    @edwawr Can you jog the laser with the arrows?

    I don't see the connect string, are you using my Grbl 1.1e firmware?

    What happens when you click the send envelope?



  • Bonjour
    Merci Zax, la machine fonctionne, le seul problème c'est qu'elle grave verticalement de haut en bas , j'ai essayer tous les axes ça ne change pas
    comment faire pour graver horizontalement
    Merci pour ton aide et ta patience
    edwawr


  • Developer of T2Laser Software

    @edwawr What control board do you have?

    Are you saying that the left/right jog does not work or does it also move the machine up/down?



  • Bonjour,
    je reviens sur mon problème de direction de gravage
    la gravure au lieu d'être horizontale est verticale de bas vers le haut
    quand je clic manuellement sur la flèche horizontale '(x) la machine monte
    quand je clic sur la flèche verticale (y) la machine travaille horizontalement
    qu'elle est la manipulation à faire pour inverser x et y
    pour graver horizontalement
    ( Generated by T2Laser )
    ( SketchGcode for Grbl )
    ( Start Point: Center )
    ( Frame Mode : Extents )
    ( Laser Max : 1000 )
    ( Vector Rate: 1000 )
    ( Rapid Feed : 2000 )
    G21
    G90
    F1000
    M05
    G00X0Y0F1000
    G92X107.6Y253.675
    G90
    G01 X75.9 Y246.625 F2000
    M03 S0
    X75.9 Y257 M03 S1000 F1000
    X77.475 Y257 M03 S1000 F1000
    X77.475 Y255.55 M03 S1000 F1000
    X78.05 Y256.225 M03 S1000 F1000
    X78.775 Y256.775 M03 S1000 F1000
    X79.65 Y257.125 M03 S1000 F1000
    X80.625 Y257.25 M03 S1000 F1000
    X81.675 Y257.125 M03 S1000 F1000
    X82.525 Y256.75 M03 S1000 F1000
    X83.15 Y256.2 M03 S1000 F1000
    X83.55 Y255.425 M03 S1000 F1000
    X84.225 Y256.225 M03 S1000 F1000
    X84.975 Y256.775 M03 S1000 F1000
    X85.825 Y257.125 M03 S1000 F1000
    X86.75 Y257.25 M03 S1000 F1000
    X88.125 Y257.025 M03 S1000 F1000
    X89.125 Y256.375 M03 S1000 F1000
    X89.75 Y255.3 M03 S1000 F1000
    X89.975 Y253.75 M03 S1000 F1000
    X89.975 Y246.625 M03 S1000 F1000
    X88.225 Y246.625 M03 S1000 F1000
    X88.225 Y253.175 M03 S1000 F1000
    X88.175 Y254.075 M03 S1000 F1000
    X88.05 Y254.675 M03 S1000 F1000
    X87.425 Y255.425 M03 S1000 F1000
    X86.375 Y255.725 M03 S1000 F1000
    X85.375 Y255.525 M03 S1000 F1000
    X84.55 Y254.975 M03 S1000 F1000
    X84 Y254.025 M03 S1000 F1000
    X83.825 Y252.65 M03 S1000 F1000
    X83.825 Y246.625 M03 S1000 F1000
    X82.075 Y246.625 M03 S1000 F1000
    X82.075 Y253.375 M03 S1000 F1000
    X81.975 Y254.4 M03 S1000 F1000
    X81.65 Y255.125 M03 S1000 F1000
    X81.075 Y255.575 M03 S1000 F1000
    X80.225 Y255.725 M03 S1000 F1000
    X79.525 Y255.625 M03 S1000 F1000
    X78.875 Y255.325 M03 S1000 F1000
    X78.325 Y254.85 M03 S1000 F1000
    X77.95 Y254.175 M03 S1000 F1000
    X77.75 Y253.25 M03 S1000 F1000
    X77.675 Y252.025 M03 S1000 F1000
    X77.675 Y246.625 M03 S1000 F1000
    X75.9 Y246.625 M03 S1000 F1000
    X99.825 Y247.9 M03 S0 F2000
    X98.875 Y247.2 M03 S1000 F1000
    X97.95 Y246.75 M03 S1000 F1000
    X97.025 Y246.475 M03 S1000 F1000
    X96.025 Y246.4 M03 S1000 F1000
    X94.5 Y246.6 M03 S1000 F1000
    X93.4 Y247.225 M03 S1000 F1000
    X92.7 Y248.175 M03 S1000 F1000
    X92.475 Y249.375 M03 S1000 F1000
    X92.575 Y250.1 M03 S1000 F1000
    X92.825 Y250.75 M03 S1000 F1000
    X93.725 Y251.775 M03 S1000 F1000
    X95 Y252.35 M03 S1000 F1000
    X95.625 Y252.475 M03 S1000 F1000
    X96.55 Y252.6 M03 S1000 F1000
    X98.4 Y252.875 M03 S1000 F1000
    X99.7 Y253.225 M03 S1000 F1000
    X99.7 Y253.675 M03 S1000 F1000
    X99.575 Y254.6 M03 S1000 F1000
    X99.2 Y255.2 M03 S1000 F1000
    X98.35 Y255.625 M03 S1000 F1000
    X97.2 Y255.775 M03 S1000 F1000
    X96.125 Y255.675 M03 S1000 F1000
    X95.375 Y255.35 M03 S1000 F1000
    X94.85 Y254.75 M03 S1000 F1000
    X94.5 Y253.8 M03 S1000 F1000
    X92.775 Y254.05 M03 S1000 F1000
    X93.1 Y255.05 M03 S1000 F1000
    X93.55 Y255.825 M03 S1000 F1000
    X94.2 Y256.425 M03 S1000 F1000
    X95.1 Y256.875 M03 S1000 F1000
    X96.2 Y257.15 M03 S1000 F1000
    X97.45 Y257.25 M03 S1000 F1000
    X98.65 Y257.15 M03 S1000 F1000
    X99.6 Y256.925 M03 S1000 F1000
    X100.325 Y256.575 M03 S1000 F1000
    X100.825 Y256.15 M03 S1000 F1000
    X101.375 Y254.95 M03 S1000 F1000
    X101.45 Y254.325 M03 S1000 F1000
    X101.475 Y253.325 M03 S1000 F1000
    X101.475 Y250.975 M03 S1000 F1000
    X101.475 Y249.875 M03 S1000 F1000
    X101.5 Y248.975 M03 S1000 F1000
    X101.525 Y248.3 M03 S1000 F1000
    X101.575 Y247.875 M03 S1000 F1000
    X102.025 Y246.625 M03 S1000 F1000
    X100.175 Y246.625 M03 S1000 F1000
    X99.825 Y247.9 M03 S1000 F1000
    X99.825 Y247.9 M03 S1000 F1000
    X99.7 Y251.85 M03 S0 F2000
    X98.5 Y251.475 M03 S1000 F1000
    X96.825 Y251.175 M03 S1000 F1000
    X95.9 Y251 M03 S1000 F1000
    X95.275 Y250.825 M03 S1000 F1000
    X94.6 Y250.25 M03 S1000 F1000
    X94.35 Y249.425 M03 S1000 F1000
    X94.475 Y248.775 M03 S1000 F1000
    X94.875 Y248.25 M03 S1000 F1000
    X95.525 Y247.9 M03 S1000 F1000
    X96.425 Y247.775 M03 S1000 F1000
    X97.4 Y247.875 M03 S1000 F1000
    X98.25 Y248.225 M03 S1000 F1000
    X98.925 Y248.75 M03 S1000 F1000
    X99.4 Y249.425 M03 S1000 F1000
    X99.625 Y250.175 M03 S1000 F1000
    X99.7 Y251.2 M03 S1000 F1000
    X99.7 Y251.85 M03 S1000 F1000
    X104.525 Y258.925 M03 S0 F2000
    X104.525 Y260.95 M03 S1000 F1000
    X106.3 Y260.95 M03 S1000 F1000
    X106.3 Y258.925 M03 S1000 F1000
    X104.525 Y258.925 M03 S1000 F1000
    X104.525 Y246.625 M03 S0 F2000
    X104.525 Y257 M03 S1000 F1000
    X106.3 Y257 M03 S1000 F1000
    X106.3 Y246.625 M03 S1000 F1000
    X104.525 Y246.625 M03 S1000 F1000
    X108.4 Y249.725 M03 S0 F2000
    X110.15 Y250 M03 S1000 F1000
    X110.4 Y249.075 M03 S1000 F1000
    X110.95 Y248.4 M03 S1000 F1000
    X111.75 Y247.975 M03 S1000 F1000
    X112.825 Y247.85 M03 S1000 F1000
    X113.875 Y247.975 M03 S1000 F1000
    X114.625 Y248.325 M03 S1000 F1000
    X115.05 Y248.875 M03 S1000 F1000
    X115.2 Y249.5 M03 S1000 F1000
    X115.075 Y250.025 M03 S1000 F1000
    X114.7 Y250.425 M03 S1000 F1000
    X114.075 Y250.7 M03 S1000 F1000
    X112.9 Y251.025 M03 S1000 F1000
    X111.25 Y251.475 M03 S1000 F1000
    X110.2 Y251.875 M03 S1000 F1000
    X109.55 Y252.3 M03 S1000 F1000
    X109.075 Y252.85 M03 S1000 F1000
    X108.8 Y253.525 M03 S1000 F1000
    X108.7 Y254.25 M03 S1000 F1000
    X109 Y255.525 M03 S1000 F1000
    X109.875 Y256.525 M03 S1000 F1000
    X111 Y257.025 M03 S1000 F1000
    X112.5 Y257.25 M03 S1000 F1000
    X113.65 Y257.15 M03 S1000 F1000
    X114.65 Y256.875 M03 S1000 F1000
    X115.45 Y256.475 M03 S1000 F1000
    X116.025 Y255.925 M03 S1000 F1000
    X116.375 Y255.225 M03 S1000 F1000
    X116.625 Y254.325 M03 S1000 F1000
    X114.9 Y254.1 M03 S1000 F1000
    X114.675 Y254.8 M03 S1000 F1000
    X114.225 Y255.35 M03 S1000 F1000
    X113.55 Y255.675 M03 S1000 F1000
    X112.65 Y255.8 M03 S1000 F1000
    X111.6 Y255.7 M03 S1000 F1000
    X110.9 Y255.4 M03 S1000 F1000
    X110.525 Y254.95 M03 S1000 F1000
    X110.4 Y254.45 M03 S1000 F1000
    X110.6 Y253.85 M03 S1000 F1000
    X111.275 Y253.375 M03 S1000 F1000
    X111.8 Y253.2 M03 S1000 F1000
    X112.825 Y252.925 M03 S1000 F1000
    X114.425 Y252.475 M03 S1000 F1000
    X115.425 Y252.1 M03 S1000 F1000
    X116.1 Y251.7 M03 S1000 F1000
    X116.6 Y251.175 M03 S1000 F1000
    X116.925 Y250.5 M03 S1000 F1000
    X117.025 Y249.675 M03 S1000 F1000
    X116.9 Y248.825 M03 S1000 F1000
    X116.5 Y248.025 M03 S1000 F1000
    X115.875 Y247.325 M03 S1000 F1000
    X115.025 Y246.825 M03 S1000 F1000
    X114 Y246.5 M03 S1000 F1000
    X112.825 Y246.4 M03 S1000 F1000
    X111.05 Y246.6 M03 S1000 F1000
    X109.75 Y247.25 M03 S1000 F1000
    X108.9 Y248.275 M03 S1000 F1000
    X108.4 Y249.725 M03 S1000 F1000
    X108.4 Y249.725 M03 S1000 F1000
    X118.75 Y251.825 M03 S0 F2000
    X118.85 Y253.175 M03 S1000 F1000
    X119.15 Y254.325 M03 S1000 F1000
    X119.65 Y255.3 M03 S1000 F1000
    X120.35 Y256.075 M03 S1000 F1000
    X121.85 Y256.95 M03 S1000 F1000
    X123.625 Y257.25 M03 S1000 F1000
    X124.65 Y257.15 M03 S1000 F1000
    X125.55 Y256.9 M03 S1000 F1000
    X126.375 Y256.45 M03 S1000 F1000
    X127.1 Y255.825 M03 S1000 F1000
    X127.7 Y255.05 M03 S1000 F1000
    X128.125 Y254.15 M03 S1000 F1000
    X128.4 Y253.125 M03 S1000 F1000
    X128.475 Y251.975 M03 S1000 F1000
    X128.325 Y250.175 M03 S1000 F1000
    X127.875 Y248.825 M03 S1000 F1000
    X127.125 Y247.8 M03 S1000 F1000
    X126.125 Y247.025 M03 S1000 F1000
    X124.925 Y246.55 M03 S1000 F1000
    X123.625 Y246.4 M03 S1000 F1000
    X122.6 Y246.5 M03 S1000 F1000
    X121.65 Y246.75 M03 S1000 F1000
    X120.825 Y247.2 M03 S1000 F1000
    X120.1 Y247.8 M03 S1000 F1000
    X119.5 Y248.575 M03 S1000 F1000
    X119.1 Y249.5 M03 S1000 F1000
    X118.825 Y250.6 M03 S1000 F1000
    X118.75 Y251.825 M03 S1000 F1000
    X118.75 Y251.825 M03 S1000 F1000
    X120.55 Y251.825 M03 S0 F2000
    X120.775 Y250.075 M03 S1000 F1000
    X121.425 Y248.825 M03 S1000 F1000
    X122.4 Y248.1 M03 S1000 F1000
    X123.625 Y247.85 M03 S1000 F1000
    X124.825 Y248.1 M03 S1000 F1000
    X125.8 Y248.85 M03 S1000 F1000
    X126.45 Y250.1 M03 S1000 F1000
    X126.65 Y251.875 M03 S1000 F1000
    X126.45 Y253.55 M03 S1000 F1000
    X125.8 Y254.8 M03 S1000 F1000
    X124.8 Y255.525 M03 S1000 F1000
    X123.625 Y255.775 M03 S1000 F1000
    X122.4 Y255.525 M03 S1000 F1000
    X121.425 Y254.8 M03 S1000 F1000
    X120.775 Y253.575 M03 S1000 F1000
    X120.55 Y251.825 M03 S1000 F1000
    X120.55 Y251.825 M03 S1000 F1000
    X130.85 Y246.625 M03 S0 F2000
    X130.85 Y257 M03 S1000 F1000
    X132.45 Y257 M03 S1000 F1000
    X132.45 Y255.525 M03 S1000 F1000
    X133.075 Y256.275 M03 S1000 F1000
    X133.85 Y256.825 M03 S1000 F1000
    X134.725 Y257.15 M03 S1000 F1000
    X135.75 Y257.25 M03 S1000 F1000
    X136.65 Y257.15 M03 S1000 F1000
    X137.475 Y256.9 M03 S1000 F1000
    X138.15 Y256.5 M03 S1000 F1000
    X138.65 Y256.025 M03 S1000 F1000
    X139.2 Y254.725 M03 S1000 F1000
    X139.275 Y254.05 M03 S1000 F1000
    X139.3 Y253 M03 S1000 F1000
    X139.3 Y246.625 M03 S1000 F1000
    X137.525 Y246.625 M03 S1000 F1000
    X137.525 Y252.95 M03 S1000 F1000
    X137.475 Y253.875 M03 S1000 F1000
    X137.325 Y254.55 M03 S1000 F1000
    X137.05 Y255.025 M03 S1000 F1000
    X136.6 Y255.4 M03 S1000 F1000
    X136.025 Y255.625 M03 S1000 F1000
    X135.375 Y255.725 M03 S1000 F1000
    X134.325 Y255.55 M03 S1000 F1000
    X133.425 Y255 M03 S1000 F1000
    X133.075 Y254.575 M03 S1000 F1000
    X132.825 Y253.975 M03 S1000 F1000
    X132.675 Y253.225 M03 S1000 F1000
    X132.625 Y252.3 M03 S1000 F1000
    X132.625 Y246.625 M03 S1000 F1000
    X130.85 Y246.625 M03 S1000 F1000
    M03 S0
    M05
    G00X107.6Y253.675
    G92X0Y0
    ceci est le résultat du dernier gravage
    Merci pour ta patience
    edwawr


  • Developer of T2Laser Software

    @edwawr If your machine is moving up/down with X commands and left/right with Y commands you have to change the firmware, it is not a software problem. First let's confirm your understanding of the axis:

    0_1535389415265_assembly_dwg_t2.jpg



  • Bonjour
    c'est bien la configuration que je décris
    les deux axes fonctionnent bien le problème c'est que la gravure se fait sur l'axe y et je voudrai que ça grave sur l'axe x
    quel firmware dois je utiliser
    je suis sur windows 10
    p/s je suis très limité en informatique
    cordialement
    edwawr


  • Developer of T2Laser Software

    @edwawr Please post a picture of your machine and the result, it is very unlikely the axis are swapped unless something else is wrong.

    I have a way to change the axis like you ask, but I am not sure of the cause and want to ensure your machine is setup correctly.



  • Bonjour Zax
    j'ai trouvé le bug, le cable pour l'axe (x) était mal branché
    maintenant tout fonctionne normalement,
    je te remercie pour ta patience,
    cordialement
    edwawr


  • Developer of T2Laser Software

    Excellent news. Happy to hear it's all working now.


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.