EleksMaker controller problem



  • My problem is that the blue LED flashes on my EleksMaker controller, it does not light up continuously. I use Candle, the connection is established. The status is Idle.
    But the spindle does not rotate, the axes move only in several steps. My machine is the A3 laser machine, + EleksMaker Z axis + EleksMakerĀ® 555 Spindle Motor. 0_1538724819397_DSC_0083.jpg 0_1538724843128_DSC_0262.jpg


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.