The belt is always slipping on my eleksdraw. It moves a little but most of the time it can't move at all because the belt slips. I have tried tightening the belt as much as possible but it still slips.
Any tips on how to fix?
@superliminal The belt should not be able to slip as the teeth are engaged in the pinion gear.
Are you sure it's routed correctly? (check slide 36)
@Zax Wow I've never seen this instruction manual before. As there are no instructions in the box, the only source I could find for assembly was on the wiki: http://wiki.eleksmaker.com/doku.php?id=eleksdraw
You should update that page to include these instructions.
I will take look at the instructions and see if I have made any errors. Will reply with update.
@superliminal I hope it helps. I have no affiliation with EleksMaker, I created these instructions to support T2Laser customers.
@Zax Sorry I thought you were affiliated with the company. This is super helpful thanks!
In fact it did help me, I took off the top plate as it suggested in the instructions. Seems I had screwed the plate in too tight. I put the plate back and now its working.