How to resolve a power buttom broken



  • Hi there, a have a simple question about Mana SE power buttom problem.

    I need to use my board while the replacement does not arrive

    Look my board:
    0_1494597125708_IMG_1944.JPG

    To resolve this, my options are:

    Create a bridge between each point (front);
    0_1494597251019_2017-05-12 10_52_21-IMG_1944.JPG ‎- Fotos.png

    Or, create a bridge between each point (back side);
    0_1494597318955_2017-05-12 10_53_16-IMG_1941.JPG ‎- Fotos.png

    Any other suggesting?


  • Active Member

    As inside the button are two current reverser, then there is two solutions:

    • If other pair works, then just enough to use (bridge, shorten) green and yellow lines in your last, smaller picture.
    • If even second pair not works, then ju can just shortcut your switch, connecting right green and yellow dots together (accordingly your smaller picture), so you can power Mana just by plugging power and switch it off by unplugging the power plug from Mana or wall.


  • @MuuSer sorry my newbie status.

    Can you draw what i need to do? :disappointed: I have many fear to burn the board.
    Tecnically only the button broken, everything works perfect with other things.

    0_1494863626394_2017-05-15 12_50_58-.png



  • If you look at the six solder blobs of the switch in your picture you need to connect the bottom right blob to the middle right blob


  • Active Member

    @ianobre, here it is:
    0_1494866338840_Button.png



  • @MuuSer Thank you so much!

    My case is the first option! The button has broken totally! Really many thanks



  • @pledgy said in How to resolve a power buttom broken:

    If you look at the six solder blobs of the switch in your picture you need to connect the bottom right blob to the middle right blob

    Thanks too! Very prestative!

    Cheers!


  • Active Member

    This post is deleted!

Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.