candle sometimes stop work during the engraving whit eleaksmill cnc



  • I have a problem since a few days,
    I start to engrave with eleakmill, and after 20 minutes, sometimes 40, sometimes 60 minutes, adn so on the mamachines stop working.

    The drill continues to rotate but does not advance more in x and y.
    And it is strange because I had just started doing this work a few days ago and had completed everything.
    There is not a specific point in which it is interrupted
    what can it be . I noticed that when this happens he writes in consol
    'Serial port error 11: A device connected to the system is not running.
    Serial port error 1: No such file or directory [CTRL + X] <Grbl 0.9i ['$' for help]
    Serial port error 11: A device connected to the system is not running.
    Serial port error 1: No such file or directory Serial port error 2: Access denied. [CTRL + X] <Grbl 0.9i ['$' for help]
    Serial port error 11: A device connected to the system is not running.
    Serial port error 1: No such file or directory
    Serial port error 2: Access denied. [CTRL + X] <Grbl 0.9i ['$' for help] Serial port error 7: Access denied.
    Serial port error 2: Access denied.
    Serial port error 9: Invalid Handle. Serial port error 1:
    No such file or directory [CTRL + X] <Grbl 0.9i ['$' for help] [CTRL + X] <Grbl 0.9i ['$' for help]


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.