When converting a picture to g-code, i got the following message.
I can manually move the Y and X axis so the usb connection is ok.
When click on continue, the axis moved to the home position and the nothing is happened.
I work with windows 10 and VC are installed.
What going wrong here?
maybe you can try run in admin mode and use outline and scan to carving it
Run as administrator and outline mode. No fault message spears but x-y axis don't move?
you can try this link:
I replaced the drivers and the problem still exist But i can manual move the Y and X axis ( Eleksdraw Pro), so drivers and mana board are not the problem. Now when selected a picture, the program give a message 'No Data Generate'.
No issue found when loaded a picture from Inkscape directly to Elekscam. So this is a software problem on windows 10 X64.
maybe you are lack some needed software like .NET 4.5 or VC running time , you can find it in EleksCam download page
Two things are important.
1 Start software as administrator.
2 Change decimal to point instead of a comma ( Go to setting. Region & language. Extra settings. Change numbers. Advanced settings).