Adjusting the laser power



  • Hi. I have been trying some things using EleksCam software. But there is a problem that the laser is basically too strong for the plywood. It basically bunrs the surface, rather than making it just "brown". Here are some pics, the first was engraved using 2000 or 3000 mm/s, while the second one 6000mm/s. As you can see, its basically burnt. Is there a way to reduce the laser power? Besides, what software can you recommend besides EleksCam? Thanks in advance :)

    2000-3000 mm/s
    0_1497885718164_received_839575336211146.jpeg

    6000 mm/s
    0_1497885729401_received_839575312877815.jpeg


  • Developer of T2Laser Software

    That's ugly! It's probably a settings issue but I don't use EleksCAM so hopefully someone else can help you. If you want to test your machine with T2Laser there's a free trial (it costs $39.95 to register).


  • Active Member

    This post is deleted!

Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.