Configuring T2 Laser
can anyone help me to configure the T2 laser software for the machine
EleksMill CNC Engraving with 500mw Laser Module
I am French and do not speak English I use google translation I bought
this software that looks pretty simple but here is I block for machine
configuration,I spent all weekend with zax to configure the software but
nothing to do that serious upside down if I could find a video showing even if it's in English it's not a problem
with the images one can get by I dare no longer disturb Zax
there is the software manual but it does not explain everything especially
when you start in this field sorry for the translation
good day to all.
@fredyvernet You can disturb me as much as you need, it's no problem.
I wonder if you have your machine orientation backwards, can you post a picture?
If the control board is at the back and laser to the front, use my default firmware (Grbl 1.1e) and check that the jog icons move the machine in the correct directions.
If you find that the up key moves the machine forwards then you would either swap the 2 Y-axis cables or select Reverse Y-axis in the Settings menu.