EleksDraw Pen Module Assembly Instructions
I received my EleksDraw today and got stuck trying to assemble the pen module. Is there an instruction of how to do this somewhere? Also, it seems that I am missing the part marked red in the first image. All I have is shown in the second picture. Quite in contrast with the plotter itself there are some badly deburred holes …!
![0_1505832510425_IMG_2762.JPG](Uploading 100%) @agung Good day, i recived the same eleksdraw machine, but the asemmbly are diferent that in the users manual (no missing parts). Attach picture, i hope help you.![0_1505832441607_IMG_2762.JPG](Uploading 100%)
Much appreciated, but the picture you uploaded seems to have been lost. Could you do it again, please?
i've the same problem: i bought 2 kits with pen module differents. How to mount this last one?
I show this pictures :
thx for help!
I figured it out. It needs to be turned around. Also, I did not figure out how the servo is supposed to be linked with the up-and-down carriage, so I glued a spacer inside of the black bracket (see last image).
Hope it helps!
@agung not acceptable, you need to complain to eleksmaker and banggood. You have to make holes to get draw to work?
@Anatoly: I did make additional holes during my attempts to get the lifting mechanism working, but in the end they were not necessary.
Complain? Maybe in my next life …
thank you Agung! the solution! I can't see further than the tip of my nose, lol. Really.
without a description or a picture, I didn't see.
I have no reason to complain. I just wanted some help. Big thanks.
Today with his son they collected such a device. And also faced with the problem of assembling the drawing node. Spent a couple of hours but did not find a solution.
Thanks for the instruction, tomorrow we will try. And you saw how you fixed the roller for the tape. We, too, could not find a solution, on YouTube everywhere the instructions for the first option picking
I have just bought it few days ago and I have figured out is if you can cut down the black rubber ends by 2mm on each of rods, it now works perfectly
This is the same as mine just wondering how it got sorted please and did the pen module go up and down
@mrskitty ... agung posted how he fixed it and says it does go up and down. its like 8 posts up. with pictures.