Software for Mac



  • Can somebody help me? Otherwise this machine is useless for me :disappointed:



  • Hello? Anybody here? Where I can download the 32 bit application?



  • I think I have found out how to flash the HEX to the board with my Mac.
    But when I connect the board via USB cable the serial port does not appear in the drop down?
    0_1495154336421_Bildschirmfoto 2017-05-19 um 02.35.22.png


  • Active Member

    This post is deleted!


  • @mrmister
    thank you! we are a little closer :)
    now I get this error when trying to flash the board:

    avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0d
    avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0a
    avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x47
    avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x72
    avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x62
    avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x6c
    avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x20
    avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x30
    avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x2e
    avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x39

    I tried it with different bit rates, but unfortunately it didn't work :(


  • Developer of T2Laser Software

    Can you use a virtual machine?

    I have several users doing that with T2Laser. Parallels for Mac seems to work the best.



  • If it is possible to flash the firmware and use a Mac, then I want to avoid extra costs for buying a licence for Windows and Parallels :)


  • Developer of T2Laser Software

    You can flash using AVRDude, it is available for a MAC and included in AvrMacPack.



  • I still get an error:

    avrdude: ser_open(): can't open device "wchusbserial1420": No such file or directory ioctl("TIOCMGET"): Inappropriate ioctl for device

    The serial port is available and connected.

    Is the command I am using correct?

    avrdude -c arduino -P wchusbserial1420 -p ATMEGA328 -b 19200 -U flash:r:ManaSE_v3.7.hex:r


  • ElekMaker Develop Department

    @pixon said in Software for Mac:

    I still get an error:

    avrdude: ser_open(): can't open device "wchusbserial1420": No such file or directory ioctl("TIOCMGET"): Inappropriate ioctl for device

    The serial port is available and connected.

    Is the command I am using correct?

    avrdude -c arduino -P wchusbserial1420 -p ATMEGA328 -b 19200 -U flash:r:ManaSE_v3.7.hex:r

    nope , the failed reason is cause our board are using arduino nano bootloader instead of arduino uno

    so you need to choose arduino nano

    and the correct command in windows is

    –C avrdude.conf -v -patmega328p -carduino -P + com + -b57600 -D -Uflash:w:\



  • Since EleksMaker Z's command line seems a bit damaged: I managed to reprogram the Mana SE board with the following command (one single command line):

    avrdude -carduino -b57600 -patmega328p -P/dev/tty.wchusbserial144420 -Uflash:w:ManaSE_v3.7.hex:i


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.