Eleks Maker Laser A3 pro 2500mw laser always ON when USB is connected to the PC and Board is powerd ON



  • hello
    I have Eleks Maker A3 Pro, 2.5w Laser Module with Eleks Maker MANA SE BOARD
    the movement i Powered the board (if the USB is CONNECTED TO PC) the laser starts to BURN.
    when i remove the USB , the laser switch of automatically.

    when i press the low laser, the low laser turns on.

    i tied with benbox and XY axis work fine.
    Eleks Maker cam Desktop doesnot connect with the engraver..
    Need help Guys.



  • @merilu said in Eleks Maker Laser A3 pro 2500mw laser always ON when USB is connected to the PC and Board is powerd ON:

    hello
    I have Eleks Maker A3 Pro, 2.5w Laser Module with Eleks Maker MANA SE BOARD
    the movement i Powered the board (if the USB is CONNECTED TO PC) the laser starts to BURN.
    when i remove the USB , the laser switch of automatically.

    when i press the low laser, the low laser turns on.

    i tied with benbox and XY axis work fine.
    Eleks Maker cam Desktop doesnot connect with the engraver..
    Need help Guys.

    do not power laser if the laser SOFTWARE not connected.

    you need remove benbox, it old, not supported.

    install elekscam, do not turn on power to laser board, connect USB to board and computer, install RST from elekscam.


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.