Show to save laser power and weak laser power



  • About Laser power and Weak Laser power.

    All times when i open the EleksCAM i need to adjust manually this options.
    It´s possible to fix and save this configuration?

    It´s is complicated to create an reference if i can´t know exactly what is the laser power configured for each use. Can i set this using GCODE?

    Maybe, like in Repetier Host (for 3d Printers) the software need a custom start script, to execute an specific GCODE before start any engraving.

    For now my principal question is: How to set this and save?
    0_1490195778126_IMG_0764 (Medium).JPG


  • ElekMaker Develop Department

    in normal situation it can auto save.

    maybe you can try run EleksCam in Administrators Mode.



  • @EleksMaker-Z Perfect! After chance access to admin mode by default works fine!

    Best!



  • @ianobre What is the effect of the Weak laser during lasering? When turn it OFF and On I see no difference..



  • @armanliness said in Show to save laser power and weak laser power:

    @ianobre What is the effect of the Weak laser during lasering? When turn it OFF and On I see no difference..

    Is just a guide line when you are not lasering. Is very useful


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.