Re: T2Laser pause From an older question, you can pause the program but the laser stays on. Here you can pause and shut off the laser. In the controller screen click on Advanced and pick Display custom buttons. Right click a button and rename it Pause, click ok. Type in the code G4 P1 S0. This will put the machine in dwell mode and shuts the laser off. The P is for time but 1.1e does not understand it but it must be in there. When running the program and you have to leave the machine, just click the Pause. When you want to resume, click the run icon 2 times and a popup will ask if you want to resume. Pick yes and it will run from where it left off. (No will restart it from the beginning)
Posts made by Alan Legary
T2 pause and Resume
any programmers out there?
There is a cam program where different burns are set by colors on the image. Blue is for vector burns, black for fill/raster and red for cut. It is made for the K40 but would be very nice to add to elekscam. take a look and see how hard it would be to add. http://www.scorchworks.com/K40whisperer/k40whisperer.html