@mschaeck Which software did you use? If you used T2Laser you should tag Zax who is the dev of this software. I don't really think it is a faulty laser diode but instead probably a corrupt firmware or even a problem with the cables. Anyway gonna tag @Zax as he is the best in these particular cases
Posts made by Anima
RE: Laser starts with delay
RE: Text in sketches
@Zax Wow okay thanks I did not think that I missed something but I did. Thank you for responding that quickly. Highly appreciated! In general thanks for your support and work. You really put effort into your products and clients Have a nice end of the year.
P.S. Do you have any settings/profile you would recommend in general for the EleksDraw? And is there another firmware that I could use instead of the grbl 0.9i EleksMana because it seems unstable with the voltage for the servo.
Do any of these work for the EleksDraw except the 0.9i? Thanks in advance and merry X-mas!
Text in sketches
So I got the problem that if I write text in the sketch there are those ugly lines in between the words .
At first I thought it is just in the program and it would not draw it but it did and because of that it takes longer AND looks really shit to be honest..
My machine is the EleksDraw, I use the "Fine Resolution" profile and the firmware grbl 0.9i for the EleksMana but I don't think that this is related to the problem. Is there an option/settings I did not see to remove those lines? I really tried every settings. Atleast I think so.
Please help me @Zax
Would be highly appreciated!
Kind regards and merry X-mas
RE: T2Laser Software - Introduction
@Zax The servo motor doesn't work anymore. I am sure that it is because it thinks I am using a laser engraver although I use the EleksDraw but when I try to change it it just spits out errors and I cannot flash the board with more up to date software et cetera. Everything works like a charm except the servo and I tested multiple and none seem to work. Any ideas on how to solve the problem? I have a genuine Nano as my microprocessor atm.
RE: No Data Generated? - how to fix?
You should check out T2Laser from @Zax
He made that software and I prefer it way more than EleksCAM. One reason is that EleksCAM is too buggy for my taste. You can download the software at t2laser.org . You can test it in the trial version and see if it works for you and if you like the features. It stops after 30minutes without a warning and cannot do more than 10000 lines of GCode in the trial version but that is more than enough to test it. As I said before. EleksCAM just sucks to be honest..
RE: T2Laser complexe outlining
@Zax I want to outline it. The whole image. Not just the outer lines. I do not want the image to be filled with ink. On the EleksCam you can use a mode that is called "outline" which outlines the inner and outer parts and keeps the details. Is that possible for the T2 Laser as well?
RE: Can't flash Nano
Used the UNO SCSP Pins and connected them like https://www.arduino.cc/en/uploads/Tutorial/Arduino_ISP_wires.jpg that. Loaded the ArduinoISP Sketch on the UNO before. Then opened the programmer arduino as ISP and chose the Nano board with the old bootloader because the new one wouldn't get accepted. @Zax
T2Laser complexe outlining
Is there a function like in EleksCam for the T2Laser? The Trace Image is not the best for that image..
Any advices? I cannot even fully outline the picture because it does not recognize it.
Please help @Zax