After I bought the wrong laser and got no refund, I got a different laser that is supposed to work.
But I don't know how! I've tried several things but they all fail.
I made a picture of the top of the laser and hopefully someone can help me how to make this work.
The laser came with a 12V + and - bus connector with the white 2 plug JST connector (same as in picture)
Then I removed the cables from the 3 plug JST connector that comes from my MANA SE board and plugged the black and red cable in the 2 plug JST so they connect to vcc and ground on the laser. the yellow wire connects to the pwm pin on the laser.
Nothing happens after i start a file or press the button on the laser.
This laser: https://www.banggood.com/445nm-2_3W-2300mW-Blue-Laser-Module-With-Heatsink-For-DIY-Laser-Cutter-Engraver-p-1105563.html
On this machine: https://www.banggood.com/A3-30x40cm-Desktop-DIY-Laser-Engraver-Cutter-Engraving-Machine-Assemble-Kit-p-1027611.html
I really want this thing to work..
Edit: I use Benbox. But if someone has a better alternative please tell me