Ok Thanks for the help Zax
Much Appreciated
Ash
A
Ashley Barton
@Ashley Barton
0
Reputation
5
Posts
239
Profile views
0
Followers
0
Following
Posts made by Ashley Barton
-
RE: Does anyone know were you can get the black USB board that is inserted into the main board as have found mine to be faultyposted in EleksMill
-
Does anyone know were you can get the black USB board that is inserted into the main board as have found mine to be faultyposted in EleksMill
Have the eleksmaker draw and the usb board worked fine got the Eleksmil
l delivered Friday last week and been trying to figure out why the usb was not connecting. So replaced with the usb board from my eleks draw and turns out the small board is faulty. So wonder what this board is called to get another. -
Can anyone please point me in the right direction were to download the firmware for eleksmill pleaseposted in EleksMill
Dose anyone know what software to download and were to find the hex file for the eleksmill cnc please
Many Thanks
-
Eleksmill Board will not upload 3rd party firmware and no movement in eleskcam when uploaded from theirposted in EleksMill
Trying to get Eleksmill board to upload 3rd party firmware from T laser but comes up with a error when flashing the board with the firmware.
Appreciate if someone could help
Many Thanks
-
Bought the eleksmaker xy plotter and have a wrong pieceposted in EleksDraw
Had the eleksmaker xy plotter delivered last week and the white plastic panel have 2 of the same for the bottom and not the top panel so the holes and do not match the same as the top shown in the assembly picture for the top 4 shaft bearings .