Found out that 2 of 3 stepper motors are working, 1 is even broken.
So may the issue is with the Mana
Posts made by Christoph Empl
RE: Tried anything but the no stepper motor is moving
Tried anything but the no stepper motor is moving
I assembled all parts, connected everything right.
1.) Can control Laser (on, off, pulse, weak)
2.) None of the three stepper motors are moving (Y1 + Y2 not moving, X not moving)
Used EleksRom to get the newest Firmware - no change - no movment
Tried also the Eleksmaker Autofix of (, .) - didn't work
Tried to turn my system into english international - didn'T work
Tried to adjust the current - didn't work
Tried to leave the belts off (because i thought may they are to strong fitted) - no change no movment
Tried it with EleksCam - no Change
Read about T2Laser which can flash firmware, which probably solved about 75% of those Problem - didn'T work
Tried with GBRL-Laser didn't work.
Flashed original ROM with EleksRom, tried to connect with EleksCam (doesn't work).
Checked if the welding is ok, couldn't see any issue.
Checked if the Stepper-Platine is fitted in correctly - seems to be fine.
Tried to connect with t2laser - worked - tried to flash Eleks 0.9 firmware and got an update error...
So from now on i don't now what i should try...
Thanks in advance!