China is now the Dragon Boat Festival, rest to May 31, we will continue to update after the holiday, if you find the problem, welcome the proposal

Z Axis Kit will give the full set of cables，but not have spindle module.A5/A3 is not very strong, so you can't have a very hard thing to do with the Z axis

How to Ret ROM

Step 1.

Please select the correct Port which you can find in the device manager ( It Called USB-SERIAL CH340 )

!!Warning!! Don't click Refresh button)

Step 2.

Click Setting---Rst ROM

Step3.

When you see "Flash ROM Done" , means Rst ROM successful

Step4.

Now you can click Refresh button to connect the machine , you will see "Find Serial Ports Successful COMx"

benbox instrution：http://forum.eleksmaker.com/topic/25/benbox-instruction

I want to see your software Settings

I think you need to have a look at this tutorial,Because of your control board is L7
http://forum.eleksmaker.com/topic/9/instruction丨how-to-upgrade-you-eleksmaker-l7-controller-to-use-elekscam

I think it maybe system problem, we use EleksCAM with windows10 normally

Please look at this article
http://forum.eleksmaker.com/topic/24/solved丨discuss-about-elekscam-didnt-work-issue-use-benbox-before-please-talk-here-and-here-is-the-newst-evolve

I'm sorry, I haven't tried V1.1, this question you can try consulting Zax, he tested v1.1

Veuillez lire attentivement la leçon, et conformément aux instructions de fonctionnement

http://forum.eleksmaker.com/topic/25/benbox-instruction