Although I bought a copy of your T2Laser sofyware I'm still having trouble getting the pen carridge to lift. I'm wondering if I've plugged the connector into the right pins.
If you turn the Eleksdraw upside down so the control box is on your left its the furthest 3 pins away from you. I've tried reversing them without any luck and I've used a couple of spare servo's just in case the one on the Eleksdraw was faulty.
But still no joy.
I've got everything else set up OK and the machine moves as if it were drawing or laser cutting.
I've followed your instruction regards Settings - Configure EleksMana Eleksdraw (2).
I even tried Settings - Configure EleksMana Servo Mode (A1), But still no joy.
( One thing, there's no way of knowing wether the firmware has been updatrd or not as nothing happens after pressing Eleksdraw 2 ).
Have you heard of this happening before.
Please let me know.
I know you can ask questions through the software, but we were having this conversation at the time so I came here first. My apologies if its out of order.