Thanks, for my purposes (3mm plywood) I think feed rate set to 30-80 would be perfect
Posts made by korbabub
RE: T2LASER cutting settings
Ok, so if I set the power to 999 (and this number doesn't come back to 255, it's just 999 all the time) it's really just 255 anyway? It's weird because as I was using the trial it went back to 255, but on the registered version it stays at 999.
Btw, which of these setting does the software use, this setting on the first "screen" or on the controll laser screen? Provided in attachments. Thanks for the multipass, couldn't find it :D
T2LASER cutting settings
Hi. I've been using t2laser to engrave things for a while but now I want to try cutting something, but I've got some issues with the settings. As far as I know, the maximum laser power is 255, but I can get it up to 1000 but still it doesn't seem as much because the effect is similar to this I achieved engraving at power set to 90... Btw. for cutting purposes, should I use plt, dxf or what kind of files? I see there is a cutting option which does only 2 passes, is there an option to make i 4-5 passes? The power is what concerns me at most though
Adjusting the laser power
Hi. I have been trying some things using EleksCam software. But there is a problem that the laser is basically too strong for the plywood. It basically bunrs the surface, rather than making it just "brown". Here are some pics, the first was engraved using 2000 or 3000 mm/s, while the second one 6000mm/s. As you can see, its basically burnt. Is there a way to reduce the laser power? Besides, what software can you recommend besides EleksCam? Thanks in advance
RE: A3 Pro doesn't move at all.
Thanks, I got it moving, but it moves only on a straight line - on the 2 side motors, which btw don't seem to be going "smooth" - guess I'd have to loose them a little, but still, it doesn't work properly. What to do now to get it started?
A3 Pro doesn't move at all.
Hi everyone. I have just finished assembling my engraver but it just doesn't work.
I tried using EleksCam, laserweb3 with no results. The problem is that the motors just don't want to move. Everything is in place I believe. When I choose a picture from EleksCam the progress bar goes rapidly as if it was moving.
I have no idea what to do besides returning it... Thanks in advance