@EleksMaker-Z Yes, I use .Net Frameworks 4.5.
@EleksMaker-Z Thanks, it's a nice little machine.
Yes, that would work but the laser will burn the edges compared to a drag knife or scoring tool which won't.
No one has replied
@Zax Thanks Zax, i solved my problem.
Here is the UNO EleksROM v3.8 HEX you can use Xloader to upload it to your UNO , and then Send E2 via Gcode sender
http://OSS.EleksMaker.com/firmware/EleksROM UNO v3.8.hex
You've never spoken more accurate words! We're all addicts, but you knew that already.
@João-Sousa 10,000 lines of G-code for raster (images) and 1,000 lines for vector (CAD or Sketch).
That should be sufficient to evaluate it and see that it runs your machine and gives good results.
Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.