Categories

• EleksMaker Studio - News And Products
  

  EleksMaker Studio - Fun Stuff And Brand New Products

  7
  Topics
  43
  Posts
  No new posts.
• EleksMaker's Products General Discussion
  

  All About EleksMaker's Products Topic Can Talk Here

  611
  Topics
  3348
  Posts

  E

  Thanks for your answer,

  I found the correspondance concerning the 8 pins on the offline controller :
  

  If someone have an idea to : where do we connect the pins on the eleksmana ?

  I tried RX(offline controller) to RX(Eleksmana) and TX(offline controller) to TX(Eleksmana) but don't work
  GND to GND and 5v to 5v work great and the offline controller turn on but no control on the motor stepper.

  Many thanks (very sorry for my english, I'm French)

• EleksMaker SoftWare Center
  

  You Can Download Via Of EleksMaker's Software

  8
  Topics
  133
  Posts
  No new posts.
• Maker / Developer Area
  

  Here is an amazing place for Maker and Developer ! we can change the world !

  49
  Topics
  215
  Posts

  M

  @Zax Ah ha! Knew I was missing something, the "autotrace" function works perfect, thanks for the info.

• Extraordinary Things And Cool Stuff
  

  Show Your Personal Projects And See Other’s Works

  77
  Topics
  421
  Posts

  M

  Wow! How long time did it take ?
  In my case, I couldn't finish engraving photo 80mm x 80mm, it took over 8 hours.

• EleksLaser
  

  The Beauty Of Technology

  892
  Topics
  5036
  Posts

  A

  Hi there, I have a coding question:
  Would it be possible to get a pen attached to the Elekslaser A3 pro to behave like one of the particles visible on this website:

  http://labs.minutelabs.io/Brownian-Motion/?fbclid=IwAR18N137jhDVHvDSxZWMo_fvuSK1PgfRUu7qu6GKqCbbJ9_IUqKnPbf-1YI

  I talked to the creator of the simulator, and he gave me the code:

  https://github.com/minutelabsio/Brownian-Motion/?fbclid=IwAR15aO8VnMQSCYcNYd4DYnlyX5qiYmVlcGJK-zEtv_b4CIOhgcdLxY7iZcE

  So, I would like the pen to continuously draw, following one of the particles.
  Is it doable and how?

  Thanks

• EleksMill
  

  EleksMaker EleksMill

  119
  Topics
  651
  Posts
  No new posts.
• EleksDraw
  

  Appearance And Process Further

  200
  Topics
  1039
  Posts

  

  If you are running a VM (bootcamp, parallels etc) then you can use T2Laser.

• EleksDraw Pro
  

  EleksDraw Pro

  29
  Topics
  189
  Posts

  

  @Michael-Tan Do you only have pressure dispenser, no auger system?

  Auger dispensers are much better for high viscosity fluids, the dispense volume is controlled more accurately and consistently. I'm looking for a quality auger dispenser for a project, it involves a silver filled conductive epoxy and very small accurate lines.

• EleksEgg
  

  More Fun More Tiny

  32
  Topics
  141
  Posts

  

  @heedaf EleksEgg works perfectly with T2Laser although I will say after making a bunch of custom golf balls with sharpie markers it's been put away and not used since. You could probably just use the trial (if you don't want to support me by registering) as the 10,000 line G-code limit for raster and 1,000 line for vector is probably enough for such a small machine.

• EleksTube
  

  EleksTube Porjects

  44
  Topics
  248
  Posts

  J

  Good morning all
  When I first connected with the software I managed to synchronize the clock and the time displayed corresponded to that of my laptop PC (surface pro). When disconnecting this one to reconnect the clock to the mains after several minutes the time never reappeared. The counter restarted at zero. I shook the pile but there was no change. I also noticed that the three buttons on the side of the clock had different functions depending on the number of times we press on it? is there a documentation of the function of its buttons? Can someone tell me what to do in order to unplug my clock from my pc and plug it back into mains without losing time? Thanking you in advance jérome

• EleksMaker Official After-Sale Service Area
  

  EleksMaker Official After-Sale Service Area

  163
  Topics
  593
  Posts

  

  @matt17 That probably means the new Nano does not have a boot loader installed, without that you can't load using the USB port. You must use Arduino IDE and an AVR programmer or another devices configured as one to load it using the ISP pins or install the boot loader so you can flash firmware via USB.

• T2 Laser 丨Cooperative Partner
  

  T2 Laser Engraving SoftWare

  252
  Topics
  1779
  Posts

  J

  Thank you. Zax.

• Inkscape丨G-code tool
  

  Inkscape instruction

  28
  Topics
  110
  Posts

  F

  Hi,

  I'm new to EleksMaker and I created GCode using InkScape. When I open the GCode in CAM it offers to start carving because a preview is not possible. Then the carving starts, but the laser is not started, only the weak light.

  Any suggestions please?

• ArtCAM丨G-code tool
  

  ArtCAM instruction

  3
  Topics
  9
  Posts
  No new posts.