Engraving Carbon Fiber
-
Another test, this time on Carbon Fiber. Used 2.5W Elekslaser, T2, 1500 speed, 255 power.
-
Hello, can this model cut in a 3mm thick carbon plate?
-
@Stéphane-Charrier It depends on the epoxy resins used, some vaporize (cut OK) and others just melt. Either way you need good ventilation.
-
That is awesome! With so less power? I'm a freestyle pilot myself as well. So your settings worked out well. Any other tips?
-
@maikel85t Yep worked pretty easily with the 2.5 laser. No other tips really!