t2 spindle speed
have got everything working using t2 to control cnc spindle cutter xyz perfect but can,t get spindle speed above 1000, changed it in settings to 3000 stays at that but control panel keeps resetting to 1000 no matter what i do
thanks for any advice
@steve596 What firmware are you using?
The typical output is 8-bit PWM or 0-255, there's no benefit in using higher values. It should allow 5000 and keep it.
@Zax so the number i put in the control panel is between 0-255 the number in the settings is the top speed speed of the spindle, so in that case 125 in control panel should be about 2500 spindle speed....?
@steve596 The control panel (you are referring to the laser min and max?) is typically aligned with the firmware, so 0-255 using my defaults.
The spindle speed value is different, it's to control the motor rpm when using CNC mode and Z-values. They aren't connected.
@Zax o.k. thanks