T2 Laser
-
All shapes and letters are showing solid even with mode Sketch Hatched, any ideas?
-
-
Yes, it looks like this when I made a box, the goal is to create a wasteboard!!
-
@sseaman What do you have the hatch spacing set to?
-
Here's an example for a wasteboard, 10mm spacing with cross hatch pattern and no outline:
-
I had it at 10, changed it to 1 then back to 10 and made the shape again, this time it took the settings, thanks
-
@sseaman There must be a check mark next to the custom menu item, glad you got it to work.
