ZAX can you help me got a question
-
Hi what are these number 1, 2, 3 switches for on my laseraxe.CNCC.mini
https://ibb.co/JknvKrC
https://ibb.co/qrsDwh9
https://ibb.co/0m5SPdF
https://ibb.co/RB6px2D
-
@elliscrane My guess would be they set the microstepping for the drivers, usually 1/4, 1/8, 1/16 etc.
Most stepper motors have 1.8 degree steps, or 200 per revolution. Microstepping is a way to decreases the step distance and increases resolution, it is common to use 1/16th so you get 3200 steps per revolution. This also makes the motors run smoother but at the cost of maximum speed and torque.