I've been using t2 laser with my a3 for some time and love the software. I've just finished making a mpcnc can I use the eleksmill board to still use t2laser. As I have 5 steppers to power 2x 2y and z.
@michaelp145 I’m not familiar with that system but probably if the motors are NEMA17 (42). The standard drivers are rated for 2A if you add heatsinks and a fan, or 1A without. So you can drive 2 motors from one driver with lower torque.
Wicked thanks you should take a look it's quite a cool design. And I will get one ordered and have a go thanks
Also sorry to be a pain have you got a link to the firmware for the board I've ordered a 3 axis mana
@michaelp145 You can use my Grbl 1.1e DEFAULT that's included with T2Laser.