TROUBLESHOOTING - Eleksmaker Help



  • All you should need if you can't get the Eleksmaker firing!

    Youtube Video


  • Developer of T2Laser Software

    @Alex-Jones Nice video. I hope you enjoy the machine, if you want to enhance it take a look at T2Laser. I support multi-colors where it will pause and tell you to swap pens which is used with DXF files, and you can also get more realistic drawing.

    I published an assembly and configuration guide for these machines in early 2017 which includes the same hints and suggestions. https://www.dropbox.com/s/2ljv0huyyocg0rm/T2Laser_EleksDraw_Setup.pdf?dl=0

    T2Laser does not require all these additional DLL's, running in admin mode (never do this with Chinese software, their Benbox program had malware that opened an internet backdoor) and includes a menu for changing modes between laser and servo, Cartesian and CoreXY etc.

    FYI: Do not move the machine manually with the steppers connected to the drivers, the back-EMF (generator effect) can easily damage the drivers.


Log in to reply
 

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.