Supported motors by EleksIVAxis?
I would like to know which motors are supported by this board? Supported rated motor voltage?
@Róbert-Ungurán Do not consider this board. It is a copy of USBCNC board and only works with cracked (illegal) software.
Which control board do you recommend for a DIY engraving CNC with 12V motors?
@Róbert-Ungurán The Eleks Mana CNC is a 3-axis controller, or there are many others that are similar. You need to know what stepper motors you are using so the controller has the appropriate drivers, what spindle or other cutting head and it's power requirements. What software are you going to use? These questions all determine the correct controller board.
I am planning to use a controller with grbl. It is a small CNC so I am planning to use NEMA 17 motors with a rated voltage of 12V and rated amps of 1.5A. I thought that the above mentioned CNC controller would be good. Why do you think the opposite?
@Róbert-Ungurán EleksIVAxis is not an Atmel based controller, it will not run Grbl and is provided with illegal cracked software. https://www.cnczone.com/forums/planetcnc/350146-software.html
Instead look at their 3-axis board:
Others that are good include the Cronos Maker, Developower and Woodpecker boards (all are 3-axis and some include relays for higher powered spindles, inputs for home switches etc).
These are all ATmega328p based boards, will run Grbl 1.1 and are supported by T2Laser.