Eleksdraw Freezing Mid-Plot
This keeps happening, which is unsurprising as the software is so clunky - but I wondered whether anyone has a solution for getting it going again, please?
@Alex-Jones It could be the software, use T2Laser as it's 100% robust. It could also be the the cheap Nano clone that Eleks use, it has a Chinese copy of the Atmel processor that is known to have temperature related memory issues. Replace it with a better quality Nano clone and see if that fixes it. I've also seen the USB cable and USB power savings causing issues.
......nopy.....we only use true AVR chip, and improve the craft....，we nerver use chinese verson 328P in our Mana products....
@EleksMaker-Z It is not a genuine Atmel ATmega328p, it is a Chinese clone - am I wrong? I know you think it is better because the specs say so but in real world application they are less reliable and that is more important.
@Zax that is genuine Atmel ATmega328p......
because the chinese version called LGT8f328P , we test it ,but it dont have enought rom for GRBL, so we nerver use then in our MANA products....all chip used are Atmel ATmega328p
if we use LGT8f328p, it need upload in 384000 not 512000, so both elekscam or T2 cant upload firmware .
and we will upgarde mana into ESP32S . with duo core 260Mhz CPU wifi/BLE soon.
so,if the mother board are eleksmaker one ,it wont be LGT8f328p, it must be Atmel one
@EleksMaker-Z That's good to know, I guess the last one I ordered from banggood was a fake as it did not have a genuine Atmel chipset.
@Zax .....banggood sometimes use our brand to sell some unknow products, thats very noisy...