T2 Total Laser power

  • I have the T2 with the 15mw laser. What is my total power output?

  • Developer of T2Laser Software

    @Uncle-Milty The output is based on your laser module not T2Laser. Just make sure the laser max value and the firmware max are the same, if using my firmware and default parameters both would be 255.

    You probably have a 15W electrical input which is really about a 3.5W optical output, what matters is the optical energy coming from the lens not how much power it converts to heat. Laser diodes are around 20 to 25% efficient and then there's some additional losses from the lens, so 3 to 3.5W is probably right.

Log in to reply

Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.