Thank you so much @Zax!
I'm using a trail camera to take some fotage of the family...after i edit the video i'll post the link!
Posts made by Atthis
RE: Small plywood bat
Yes, going fast and adding a blower to the laser head, made the edge more clear and the kerf of the cut extremely small.
I mesured it with a micrometer and the difference between the perimeter of a small square of 10mmx10mm and the small square cut out is just 100 micron...very impressive
Small detail for a hedgehog feeding station
i used the laser to add some detail on a hedgehog feeding station i made.
I cut with the laser a small hedgehog shape to put it on the top of the entrance and the logo of the woodworking shop to be put on the side.
The hedgehogs where really happy of this feeding station, two adult and three juvenille eat evry night into it.
The sign of the workshop is made of hazel and the hedgehog shapes is made of alder
The feeding station
The logo of the workshop
Small plywood bat
For a bats workshop, I cut some plywood (4mm) shapes to decorate some batboxes.
All the bats made were decorated by the children with natural linseed oil and vegetable color paint
Setup of the eleksmaker A3 2.5 watt:
feed rate: 480mm/sec
N° of pass: 30
I found more easy to cut with a rapid feed rate than going slow like 100 or 120mm/sec
Setting of Sketch (hatch) mode
There is a way to control the orientation and the filling in the sketch (hatch) mode?!
I read the pdf of t2 and it show some left to righ , right to left diagonal filling and other parameters but i cant find it in the program.
thanks in advance for the answer
RE: Laser a03-3500 con ttl
@deky A quale vite ti riferisci?!
Se intendi sulla scheda dove si collegano tutti i cavi dei motori e del laser, servono per regolare la forza dei motori. Come ti ha scritto @Nottingham82 metti una foto della vite così riusciamo ad aiutarti!