Hi @Zax, Ihad tried the servo mode and the laser power setting as per the picture below:
it still doesn't work. I had the laser module still plugged in to it's port and it still just fired up the laser on testing, the servo did nothing.
Hi I have an A3 elekslaser and would like to take the laser module off and use a pen instead. I see there is a servo socket on the eleksmaker mana se v3.2 board and have plugged a servo in and changed the setting on elekscam to servo mode but have not been able to control the servo this way. What am I missing to get the servo to work?
I've not long had an A3 engraver and am trying to modify it to work as a vinyl cutter with a servo operating instead of the laser. I see that there's a servo connection but it is not as easy as pluging in a servo and selecting servo mode on elekscam as I've tried this to no avail. in layman's terms what do I need to do?
Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.