When I import gcode into EleksCam (I made it with the elekscam plugin for inkscape), this message appears and I can not see the drawing on the program screen
Download libusb0.dll from the internet and copy it to your PC c: / windows / systen32
Then everything will be ok
The PC recognizes the machine perfectly: "find serial ports successful" and the green LED lights up. It also lights a red LED (it is near to the green on the circuit board).
The blue LED also lights when the power is turned on.
If I send orders to the motors using the tabs (<X- or X +> etc etc), they move perfectly but, when I load a drawing and give it start, now only the servo works, the motors do not move at all.
Thank you so much for everything, sorry for your inconvenience.
P.S. What is your version of EleksCAM?
I read a message where you said that you did not work the "ElksEgg" machine with the software EleksCAM
I have also tried EleksROM and I have not achieved anything.
You can tell me how you made it work (step by step if possible).
Thank you very much and best regards
Looks like your connection to Offical Forum was lost, please wait while we try to reconnect.