Connected the power to my EleksMaker A3 Pro
Connected the USB to the A3 Pro board and to my laptop
Opened the EleksMaker Softare
Installed the driver
Closed EleksMaker Software
Opened Device Manager for the COM port (COM4)
Opened EleksMaker Softer
Changed to COM4 and clicked refresh
The software comes back with
"Find Serial Port Faild. Please make sure you are already connect EleksMaker CNC device. Then click [Refresh]
So, the dirver is loaded fine, but the software does not recognize the COM4 port. Tried this with COM5 too. No success.
Could this be a bad Arduino board?